AAI HB-319 Single Bar Trainer's Height adjusts from 43 1/4" to 90 1/2" (1100 to 2300mm) in 200mm increments, and from 90 1/2" to 106 1/4" (2300 to 2700mm) in 50mm increments.
Horizontal Bar Safety Notice:
Based on data supplied by the FIG Safety Symposium, AAI strongly recommends that the horizontal bars and mounting collars be examined for wear on a regular basis, and be replaced every three (3) years, to reduce the possibility of breakage. The newer moves being performed are applying greater impact loads and vibrations on the bar.

Stainless steel bar meets FIG strength specifications.
Height adjusts from 45 1/4" to 92 1/2" (1150 to 2350mm) in 200mm increments, and form 92 1/2" to 106 1/4" (2350 to 2700mm) in 50mm increments .

Horizontal Bar Safety Notice:
Based on data supplied by the FIG Safety Symposium, AAI strongly recommends that the horizontal bars and mounting collars be examined for wear on a regular basis, and be replaced every three (3) years, to reduce the possibility of breakage. The newer moves being performed are applying greater impact loads and vibrations on the bar.